Segellattenbefestigung beim Prism Radian

Hallo Patrick,

ist schon ewige zeiten her, da ich den mal hatte.
Ich meine die Segellatten (Segellättchen) waren Glasfaser-Rundstäbe, die wurden von oben (gleich unterhalb der Leitkante) her eingeführt und nicht befestigt, brauchte man auch nicht, denn durch die Vorspannung saßen Sie bombenfest.

Hoffe Du kannst mit dem kleinen Tipp was anfangen.

Grüßle Lothar

Zitat

Original von PaDic
Hallo,

hat vielleicht von euch noch jemand den Prism Radian

Ja !

Zitat

und könnte mal nachschauen, wie die Segellatten befestigt werden? Werden diese durch das Segel geschoben und unten nicht befestigt

Yes !

Zitat

oder werden sie oben in diese Lasche gesteckt und unten mit Spanngummis befestigt?

Non !

Zitat

Ich habe sie jetzt erstmal ins Segel gesteckt, ging schwer, da es innen arg verklebt war und unten keine Spanngummis befestigt waren.

Normal.

Zitat

Und ist das normal, dass der Drachen so eine "lustige" 4-Punkt-Waage hat?

Ja Normal, der Radian ist ein "Oldtimer/vintage" kite (1992).

Und für Prism's fans :

Prism Stand offs -
-----------------------------------------------------------------------
* Measurements are from the front side of the sail clip
to the end cap/ends unless otherwise noted - These measurements were taken here and do not reflect Prism Designs, manufacturing specifications.
-----------------------------------------------------------------------
3-D
Outer/Short 5 - 5/16" total length .050 carbon
sail stop is set at 3/8" in from the end of the rod
Inner/Long 6 - 13/16" total length .050 carbon
sail stop is set at 3/8" in from the end of the rod

-----------------------------------------------------------------------
Alien
8 - 1/16" .110 carbon - ref to top note *
Total length from end to end with cap and sail clip installed 8 - 3/8"
(sail clip not closed)
(Upper Spreader = 22 - 11/16" .1960 carbon)
-----------------------------------------------------------------------
98 Std. Eclipse
9 - 7/16" .110 Carbon - ref to top note *
Total length from end to end with cap and sail clip installed 9 - 3/4"
(sail clip not closed)
-----------------------------------------------------------------------
Vented Eclipse
Stand offs 9 - 3/4 "
Battons .098 carbon - 13-3/8"
-----------------------------------------------------------------------
SUL Eclipse
Stand offs 9 - 3/4 "
Battons .098 carbon - 13-3/8"
-----------------------------------------------------------------------
Elixir
Inner & outer 7-1/8" .110 glass
Middle 9 -3/4" .110 glass
Total length from end to end with cap and sail clip installed
(sail clip not closed)
-----------------------------------------------------------------------

98 Fanatic
Inner 8 - 3/4" .110 carbon - ref to top note *
Outer 6 - 5/8" .110 carbon - ref to top note *
-----------------------------------------------------------------------
98 Illusion Std & Vented
Inner 9 - 1/2" .110 carbon - ref to top note *
Total length from end to end with cap and sail clip installed 9 - 7/8"
(sail clip not closed)
Outer 7 - 5/8" .110 carbon - ref to top note *
Total length from end to end with cap and sail clip installed 8"
(sail clip not closed)

-----------------------------------------------------------------------
Legacy
Outer .110 carbon - 8.3125"
Inner . 110 glass - 9.0 "
Middle . 110 carbon - 10.4375"
Total length from end to end with cap and sail clip installed
(sail clip not closed)

-----------------------------------------------------------------------
Micron
Clip on style 5 - 3/8" .080 carbon - ref to top note*
Total length from end to end and sail clip installed 5 - 5/8"
(sail clip not closed)
Old style with aluminum stop at sail 5 - 3/16" ref to top note*
Total length from end to end 5 - 5/8"
( total lenght of actual stand off rod after sail stop is installed is 5 - 3/16"

(Upper Spreader = 7 - 1/2" .098 carbon)

-----------------------------------------------------------------------
98 Ozone Clip on standoffs
Outer 6 - 5/8" .080 carbon - ref to top note *
Inner 8 - 3/4" - ref to top note *
-----------------------------------------------------------------------
98 Ozone Early
Outer Batten style - total length 7 - 1/2" end cap to end cap installed
Inner 8 - 3/4" - ref to top note *
-----------------------------------------------------------------------
Prophecy
Shortest stand off : outer holes
7 - 15/16" .110 carbon - ref to top note *
Total length from end to end with cap and sail clip installed 8- 5/16"
(sail clip not closed)

Medium stand off: Inner holes
8 - 11/16" .110 carbon - ref to top note *
Total length from end to end with cap and sail clip installed 9 - 1/16"
(sail clip not closed)

Long Stand off: Middle holes
11" .110 carbon - ref to top note *
Total length from end to end with cap and sail clip installed 11-3/8"
(sail clip not closed)

(Upper spreader 24- 1/2")
(lower spreader 34 - 1/4" just rod, ferrule not in this measurment)
Exposed solid ferrule lenght should be 2 - 1/4"

-----------------------------------------------------------------------
Radian
with aluminum stop at sail 8 - 3/ 8" .098 carbon - ref to top note*
Total length from end to end 8 - 7/8""
( total lenght of actual stand off rod after sail stop is installed is 8 - 3/8")
Sail Battons shortest to longest .098 glass
6 - 1/2"
8 - 3/4"
12 - 3/8"
15 - 1/8"

-----------------------------------------------------------------------
Spark
Single stand off 9 - 1/2"
Total length from end to end with cap and sail clip installed 9 -7/8"
(sail clip not closed)

-----------------------------------------------------------------------
Spark II
Inner 5 - 3/4" .110 carbon - ref to top note *
Total length from end to end with cap and sail clip installed 6 - 1/8"
(sail clip not closed)
Outer 6 - 5/8" .110 carbon - ref to top note *
Total length from end to end with cap and sail clip installed 8"
(sail clip not closed)

-----------------------------------------------------------------------
Total Eclipse
11 - 5/8 " .110 carbon - ref to top note *
Total length from end to end with cap and sail clip installed 11"
(sail clip not closed)
(Sail Batton - end to end with caps on - 16 - 3/4")

-----------------------------------------------------------------------
Triad (frame/spreaders) 15 -5/16" .080 carbon
-----------------------------------------------------------------------
Vapor
Inner 9 - 7/8 ".080 carbon - ref to top note *
Total length from end to end and sail clip installed10 -1/8"
(sail clip not closed)
Outer 7 - 3/16" .080 carbon (clip on style)- ref to top note *
Total length from end to end and sail clip installed 7 - 3/8"
(sail clip not closed)

-----------------------------------------------------------------------
Vector
Inner 6 - 3/4" .080 carbon - ref to top note *
Total length from end to end and sail clip installed 7- 1/8"
(sail clip not closed)
Outer 5 - 3/8 " .050 carbon (clip on style)- ref to top note *
Total length from end to end and sail clip installed 5 - 1/2 "
(sail clip not closed)

Outer Batten style - NA

(Upper Spreader = 17 - 3/8" .125 carbon)

- Editiert von Michel am 25.06.2006, 15:44 -