Horvat de tomaso honey help assembly & tuning

    Hello,
    I bought an used original Horvath.ch de tomaso honey, unfortunately I have some problems: the endkappe were not assembled and I don't know the correct position, if I put them above the stoppers the crossbar is too much curved...
    if I put the enkappe under the stoppers they slide down.
    Maybe the stopper position is no correct?
    The other question is, the crossbar is not original, so I would need to know which kind of rod and the diameter of the original one.
    I put some pictures, is not easy for me to explain in english (..unfortunately in german even worst...)


    endkappe under the stopper:


    Endkappe above the stopper:


    Endkappe slide down:


    Thanks for your help, kind regards.

    Hello Tullo, did you see the little black dots on both sides? This ist normaly the neutral position of the stopper for the crossbar. If is the stopper on neutral position (both sides), and the crossbar correctly assemled, he cant slide down. I didnt have a honey, so that i cant give you the measurement of the crossbar.
    For better information, please go to horvath.ch, there is a setup guide, or ask Thomas Horvath directly via email (for the measurement). Maybe make more pictures from the complete kite above, so that we, or he can make you arrows for the correct position.


    :thumbsup:

    __________
    Gruß, Robert

    Einmal editiert, zuletzt von RobertV8 ()

    Thanks Robert, your reply is very helpful, I thought the stoppers are glued, but they can slide instead, so I can put them in the right position.
    I will contacnt Thomas Horvath about the crossbar.


    Kind regards.


    Tullo